Marquis C725 Specifications.
Motherboard:
Intel 5000X Greencreek workstation board, E-ATX form factor
CPU:
Intel Dual Core Xeon processors (Woodcrest), 2M+2M full speed L2 cache,
1066MHz or 1333mhz Quad Pumped FSB, Core micro-architecture, HyperThreading (SMT), EM64T, Socket LGA771
Intel Quad Core Xeon processors (Clovertown), 4M+4M full speed L2 cache,
1066MHz or 1333mhz Quad Pumped FSB, Core micro-architecture, HyperThreading (SMT), EM64T, Socket LGA771
Chipset:
Intel 5000X Greencreek workstation chipset
Intel ESB2 Enterprise Southbridge and PCI-X Hub (PXH-V)
ESB2 6-port SATA II controller with HostRAID1
Single Ultra ATA/100 IDE controller supporting two UDMA devices
Texas Instruments IEEE1394a Firewire controller
Memory Subsystem:
Eight 240-pin DIMM banks supporting up to 32GB DDR2-667 ECC FB-DIMM memory, 667mhz, 128-bit memory bus
Note: Memory modules must be populated in pairs.
Graphic Subsystem:
ASUS EN7200GS/HTD/256M, Nvidia® GeForce 7200GS, PCI-Express x16, 256MB DDR2, 450MHZ core, 333mhz DDR memory, 400Mhz RAMDAC, one digital port (DVI-I), one analog port (DB-15), TV-Out (SVHS), dual head display
Hard Disk Subsystem:
(C725-T/TR2) Up to four Serial ATA II hard drives in capacity from 80GB to 2TB. These drives can be configured as standalone, software RAID (725-T) or hardware RAID (725-TR2)
(C725-SS) Up to four SAS hard drives in capacity from 36GB to 450GB. These drives can be configured as standalone or software RAID
SCSI Subsystem:
(C725-SS) LSI SAS3041-R 4-port PCI-X SAS controller
(C725-TR2) 3Ware Escalade 9650SE-4LPML Serial ATA II RAID controller, RAID level 0, 1, 5, 10 & JBOD, PCI-Express x4, 256MB DDR2-533 ECC cache, optional Battery Backup Unit (BBU)
CD-ROM Subsystem:
20X DVD+-RW dual layer optical burner, Serial ATA interface
Sound Subsystem:
Onboard AC'97 audio CODEC
Network Subsystem:
Onboard Intel 82563EB (Gilgal) Dual port PCI-Express Gigabit Ethernet controllers, 1000BaseTX, RJ-45
Optional ASMB3 in-band and out-of-band remote server management (over LAN, IPMI 2.0)
System Slots:
One (1) PCI Express x16 slot (x16 signal)
One (1) PCI Express x16 slot (x4 signal)
One (1) PCI Express x8 slot
Two (2) 64-bit/100/133MHz bus mastering PCI-X slots, 3.3V
One (1) 32-bit/33MHz bus mastering PCI slot, 5V
One (1) SODIMM socket for remote server management
System I/O:
One (1) ECP/EPP Bi-directional parallel port
Four (4) USB 2.0 ports (rear access)
Two (2) USB 2.0 ports (front access)
One (1) Firewire port
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
One (1) Line in, MIC, and Speaker port
One (1) S/P DIF Out port
Two (2) RJ-45 Ethernet ports
Floppy Drive:
1.44M 3.5-inch drive2
Mouse:
Logitech Optical Wheel Mouse, PS/2
Keyboard:
Keytronic KT-2000 104-key PS/2 keyboard
Chassis:
E-ATX Mid Tower case, FCC Class B, black bezel (standard) / beige (optional)
Chassis Images:
Front View, Front View w/ Hotswap Backplane
Security locks for the front panel and side panel
800W EPS12V green power supply with active PFC
Three (3) accessible 5.25" drive bays
SAS backplane supporting four hotswap hard drives
One (1) 12cm exhaust fan, ball bearing, 4-pin PWM
One (1) 9cm front fan, ball bearing, 4-pin PWM
One (1) 8cm HD cooling fan, ball bearing, 4-pin PWM
One (1) exhaust air duct for the memory slots
Active CPU heatsinks with 4-pin PWM fans
Dimensions: 533mm (D) x 198mm (W) x 425mm (H)
Preinstalled Software:
Red Hat Linux with ASL optimized kernel, 32-bit or 64-bit operating system
- HostRAID function is not supported under Linux.
- Floppy drive occupies one of the 5.25in drive bay.
- Digital port not compatible with monitors that use DVI-I cable.