Sovereign 8875 Specifications.

Motherboard:
Intel 5000P Blackford server board, E-ATX form factor

CPU:
Intel Dual Core Xeon processors (Woodcrest), 2M+2M full speed L2 cache, 1066MHz or 1333mhz Quad Pumped FSB, Core micro-architecture, HyperThreading (SMT), EM64T, Socket LGA771

Intel Quad Core Xeon processors (Clovertown), 4M+4M full speed L2 cache, 1066MHz or 1333mhz Quad Pumped FSB, Core micro-architecture, HyperThreading (SMT), EM64T, Socket LGA771

Chipset:
Intel 5000P Blackford server chipset
Intel ESB2 Enterprise Southbridge and PCI-X Hub (PXH-V)
ESB2 6-port SATA II controller with HostRAID1
Single Ultra ATA/100 IDE controller supporting two UDMA devices

Memory Subsystem:
Eight 240-pin DIMM banks supporting up to 32GB DDR2-667 ECC FB-DIMM memory, 667mhz, 128-bit memory bus

Note: For best performance, populate 4 or 8 modules to enable quad channel memory access.

Graphic Subsystem:
Onboard ATI ES1000 VGA controller with 16M display ram

Hard Disk Subsystem:
Up to forty Serial ATA hard drives in capacity from 80GB to 1TB. These drives can be configured as standalone unit or hardware RAID, level 0, 1, 5, 10, hotspare supported

Up to two Serial ATA hard drives in capacity from 80GB to 1TB. These drives can be configured as standalone unit or software RAID (OS)

ATA Subsystem:
Onboard single channel Ultra ATA/100 controller

SCSI Subsystem:
One 3Ware Escalade 9650SE-16ML Serial ATA II RAID controller, RAID level 0, 1, 5, 6, 10 & JBOD, PCI-Express x8, 256MB ECC cache, optional Battery Backup Unit (BBU)

One 3Ware Escalade 9650SE-24M8 Serial ATA II RAID controllers, RAID level 0, 1, 5, 6, 10 & JBOD, PCI-Express x8, 512MB ECC cache, optional Battery Backup Unit (BBU)

CD-ROM Subsystem:
16X DVD+-RW dual layer optical writer

Sound Subsystem:
None

Network Subsystem:
Onboard Intel 82563EB (Gilgal) Dual port PCI-Express Gigabit Ethernet controllers, 1000BaseTX, RJ-45
Optional Intelligent Platform Management Interface (IPMI 2.0) board

System Slots:
One (1) 3.3V2 64-bit/100MHz PCI-X slot, PCI-X bus #1
One (1) 3.3V2 64-bit/133MHz PCI-X slot, PCI-X bus #2
One (1) 3.3V2 64-bit/133MHz PCI-X slot, PCI-X bus #3
Two (2) PCI Express x8 slots
One (1) PCI Express x8 slot with x4 signal

System I/O:
One (1) RS-232C 16550 serial port (rear access, COM A)
One (1) ECP/EPP Bi-directional parallel port
One (1) DB-15 VGA port
Two (2) USB 2.0 ports (rear access)
One (1) USB 2.0 port (front access)
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
Two (2) RJ-45 Ethernet ports

Floppy Drive:
1.44MB floppy drive

Mouse:
Optional

Keyboard:
Optional

Chassis:
ASL 8U Rack mount chassis, FCC Class B
One (1) 5.25in external drive bay
Two (2) 5.25in slim external drive bays
One (1) 3.5in external drive bay
One (1) 3.5in slim external drive bay
Copper-based active CPU heatsinks
1350W 2+1 hotswap and redundant EPS12V power supply
Dimensions: 14" (H) x 19" (W) x 27" (D)
Ten (10) Multi-lane SAS backplanes
Forty (40) hotswap SATA hard drive bays
Two (2) coldswap SATA hard drive bays (rear access)
Five (5) 120mm hotswap blowers
Two (2) 8cm rear exhaust fans
26in sliding rails kit

Preinstalled Software:
Red Hat Linux with ASL optimized kernel, 32-bit or 64-bit operating system

  1. HostRAID is not supported under Linux.
  2. Slot is incompatible with 5V PCI add-on card.
Phone: 1.877.ASL.3535