Sovereign 2905 Specifications.

Motherboard:
Supermicro H8DME-2 Dual Opteron motherboard

CPU:
AMD® 4-core Opteron® Model 2300 processors, Shanghai, 45nm, 4x512K L2 cache, Socket F
AMD® 6-core Opteron® Model 2400 processors, Istanbul, 45nm, 6x512K L2 cache, Socket F

Chipset:
Nvidia MCP55 Pro HyperTransport I/O Hub
NEC uPD720400 PCI-X I/O Hub
Single channel UltraDMA/133 bus mastering IDE controller

Memory Subsystem:
Sixteen DIMM banks supporting up to 64GB DDR2-800 or 128GB DDR2-533 ECC registered SDRAM memory. Dual channel (128-bit) memory bus supporting 25.6GB/s (DDR2-800) or 16.8GB/s (DDR2-533) accumulated memory bandwidth.

Note: To enable 128-bit memory bus, memory modules must be populated in pairs.
Note: If 6 or 8 modules are installed per CPU socket, the memory bus will be reduced to 533mhz.

Graphic Subsystem:
Onboard ATI ES1000 with 16MB display ram

Hard Disk Subsystem:
(2905-SS/SR) Up to eight SAS hard drives in capacity from 36GB to 300GB or eight SATA drives in capacity from 80GB to 1TB. These drives can be configured as standalone unit or software RAID (2905-SS) or hardware RAD (2905-SR). Note: Using SAS and SATA drives together is an unsupported configuration.

(2905-TR2) Up to eight Serial ATA hard drives in capacity from 80GB to 1TB. These drives can be configured as standalone unit or disk array(s) using hardware RAID

SCSI Subsystem:
Onboard MCP55 Pro 6-port Serial ATA II controller

(2905-SS) LSI SAS3080X-R 8-port PCI-X SAS controller

(2905-SR) 3Ware Escalade 9690SA-8i Serial ATA II RAID controller, RAID level 0, 1, 5, 6, 10 & JBOD, PCI-Express x8, 512MB DDR2-533 ECC cache, optional Battery Backup Unit (BBU)

(2905-TR2) 3Ware Escalade 9650SE-8LPML Serial ATA II RAID controller, RAID level 0, 1, 5, 6, 10 & JBOD, PCI-Express x4, 256MB DDR2-533 ECC cache, optional Battery Backup Unit (BBU)

CD-ROM Subsystem:
Combo DVD-ROM (16X) and CDROM (52X)/CDR (52X)/RW(24X) drive

Sound Subsystem:
None

Network Subsystem:
Two onboard MCP55 Pro PCI-Express Gigabit controllers, 1000BaseTX
Optional Intelligent Platform Management Interface (IPMI 2.0) board

System Slots:
Two (2) PCI-Express x8 slots
Two (2) 133mhz PCI-X expansion slots
Two (2) 100mhz PCI-X expansion slots
One (1) IPMI slot

System I/O:
One (1) RS-232C 16550 serial port
Two (2) USB 2.0 ports
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
One (1) 15-pin VGA port
Two (2) RJ-45 ports

Floppy Drive:
Optional

Mouse:
Optional

Keyboard:
Optional

Chassis:
ASL Pedestal Tower Chassis, FCC Class B

  • Optional 4U rack mount conversion kit

645W low noise EPS12V power supply with PFC
Dimensions: 7.0" (H) x 17.1" (W) x 25.39" (D)
Three (3) accessible 5.25" drive bays
SAS backplane without enclosure management

  • Eight (8) hotswap hard drive bays

Four (4) 8cm hotswap centered fans
Two (2) active CPU heat sinks
Air baffle for the processor and memory slots

Preinstalled Software:
Red Hat 32-bit or 64-bit Linux with ASL optimized kernel

Phone: 1.877.ASL.3535