Omega 1915 Specifications.

Nvidia nForce Pro 2200 Dual Opteron server platform

AMD® 4-core Opteron® Model 2300 processors, Shanghai, 45nm, 4x512K L2 cache, Socket F
AMD® 6-core Opteron® Model 2400 processors, Istanbul, 45nm, 6x512K L2 cache, Socket F

Nvidia nForce Pro 2200 HyperTransport I/O Hub
Dual channel UltraDMA/133 bus mastering IDE controllers

Memory Subsystem:
Sixteen DIMM banks supporting up to 64GB DDR2-800 or 128GB DDR2-533 ECC registered SDRAM memory. Dual channel (128-bit) memory bus supporting 25.6GB/s (DDR2-800) or 16.8GB/s (DDR2-533) accumulated memory bandwidth.

Note: To enable 128-bit memory bus, memory modules must be populated in pairs.
Note: If 6 or 8 modules are installed per CPU socket, the memory bus will be reduced to 533mhz.

Graphic Subsystem:
Onboard XGI Volari Z9 with 32MB display ram

Hard Disk Subsystem:
Up to two Serial ATA hard drives in capacity from 80GB to 1TB. These drives can be configured as standalone unit or disk array(s) using the Linux software RAID.

SCSI Subsystem:
Onboard nForce4 4-port Serial ATA II controller

CD-ROM Subsystem:
16X DVD-ROM optical reader

Sound Subsystem:

Network Subsystem:
Two onboard Broadcom BCM5721 PCI-Express Gigabit controllers, 1000BaseTX
Optional ASMB3 in-band and out-of-band remote server management (over LAN, IPMI 2.0)

System Slots:
Two (2) PCI-Express x16 slots1 (half-length card only)

System I/O:
One (1) RS-232C 16550 serial port
Two (2) USB 2.0 ports (rear panel)
Two (2) USB 2.0 ports (front panel)
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
One (1) 15-pin VGA port
Two (2) RJ-45 ports

Floppy Drive:



ASL 1U Rack mount chassis, FCC Class B
500W EPS12V power supply with PFC
Dimensions: 43.6mm (H) x 445mm (W) x 670mm (D)
One (1) 5.25in optical drive bay (used)
Note: This drive bay only supports certain optical models from ASUS and Sony.
Serial ATA II backplane supporting two hotswap hard drives
Eight (8) 40mm system cooling fans
Copper-based passive heatsinks and air baffle for the processors
Sliding rails kit with telco mount support
Power, LAN1, LAN2, System Fail, and System ID LED

Preinstalled Software:
Red Hat 32-bit or 64-bit Linux with ASL optimized kernel

  1. Slot operates in 8 lanes only.
Phone: 1.877.ASL.3535