Monarch 1928 Specifications.

Motherboard:
Nvidia nForce Pro 2200 Dual Opteron server platform

CPU:
AMD® Dual Core Opteron® Model 2000 processors, 90nm, 2x1M L2 cache, Socket F
AMD® Quad Core Opteron® Model 2300 processors, 65nm/45nm, 4x512K L2 cache, Socket F
64-bit integer registers, 128-bit SSE/SSE2 registers
48-bit virtual addresses, 40-bit physical addresses
AMD 64-bit x86 instruction set extensions

Chipset:
Nvidia nForce Pro 2200 HyperTransport I/O Hub
Dual channel UltraDMA/133 bus mastering IDE controllers

Memory Subsystem:
Sixteen DIMM banks supporting up to 16GB DDR2-667 or 32GB DDR2-533 ECC registered SDRAM memory
Dual channel (128-bit) memory bus supporting 21.4 GB/s (DDR2-667) or 16.8 GB/s (DDR2-533) accumulated memory bandwidth

Note: To enable 128-bit memory bus, memory modules must be populated in pairs.
Note: To enable NUMA, a minimum of four modules are required.

Graphic Subsystem:
Onboard XGI Volari Z9 with 16MB display ram

Hard Disk Subsystem:
Up to two Serial ATA hard drives in capacity from 80GB to 750GB. These drives can be configured as standalone unit or disk array(s) using the Linux software RAID.

SCSI Subsystem:
Onboard nForce4 Serial ATA II controller

CD-ROM Subsystem:
24X Ultra DMA/33 slim CDROM reader

Sound Subsystem:
None

Network Subsystem:
Two onboard Broadcom BCM5721 PCI-Express Gigabit controllers, 1000BaseTX
Onboard in-band and out-of-band remote server management over LAN, IPMI 2.0

System Slots:
One (1) 64-bit bus mastering PCI-E x16 slot (half-length card only)

System I/O:
One (1) RS-232C 16550 serial port
Two (2) USB 2.0 ports (rear panel)
Two (2) USB 2.0 ports (front panel)
One (1) PS/2 Mini DIN keyboard/mouse port
One (1) 15-pin VGA port
Two (2) RJ-45 ports
One (1) RJ-45 port (remote server management only)
One (1) Firewire 1394a port

Floppy Drive:
Optional

Mouse:
Optional

Keyboard:
Optional

Chassis:
ASL 1U Rack mount chassis, FCC Class B
500W EPS12V power supply with PFC
Dimensions: 1.7" (H) x 16.9" (W) x 27.5" (D)
One (1) accessible slim size CDROM bay
One (1) accessible slim floppy drive bay
Serial ATA II backplane supporting two hotswap hard drives
Two (2) high performance system blowers
Copper-based passive heatsinks and air baffle for the processors
Sliding rails kit with telco mount support
Power, LAN1, LAN2, System Fail, and System ID LED

Preinstalled Software:
Red Hat 32-bit or 64-bit Linux with ASL optimized kernel

Phone: 1.877.ASL.3535