Monarch 1810 Specifications.

Motherboard:
AMD Dual Opteron server motherboard, E-ATX form factor

CPU:
AMD® Opteron® Model 2XX processors, .13 or .09 micron, 1M L2 cache, Socket 940, single core
AMD® Opteron® Model 26X/27X processors, .09 micron, 2M1 L2 cache, Socket 940, dual core
64-bit integer registers, 128-bit SSE/SSE2 registers
48-bit virtual addresses, 40-bit physical addresses
AMD 64-bit x86 instruction set extensions

Chipset:
AMD-8111 HyperTransport I/O Hub
AMD-8131 HyperTransport PCI-X Tunnel
Dual channel UltraDMA/133 bus mastering IDE controllers

Memory Subsystem:
Eight DIMM banks supporting up to 16GB DDR400 or 32GB DDR333 ECC registered SDRAM memory
Dual channel (128-bit) memory bus supporting 11.4 GB/s (DDR333) or 12.8 GB/s (DDR400) accumulated memory bandwidth

Note: To enable 128-bit memory bus, memory modules must be populated in pairs.
Note: To enable NUMA, a minimum of four modules are required.

Graphic Subsystem:
Integrated ATI Rage XL with 8MB SDRAM

Hard Disk Subsystem:
(1810-T) Up to four Serial ATA150 hard drives in capacity from 80GB to 400GB. These drives can be configured as standalone unit or disk array(s) using the Linux software RAID.

(1810-S/SR) Up to four Ultra 320/m SCSI hard drives (SCA/80-pin) in capacity from 36GB to 300GB. These drives can be configured as standalone unit or disk array(s) using the software RAID (1810-S) or hardware RAID (1810-SR).

SCSI Subsystem:
Silicon Image Sil3114 Serial ATA1502 controller

(1810-S) Onboard Adaptec 7902 dual channel Ultra 320/m SCSI controller

(1810-SR) LSI Logic MegaRAID 320-1 single channel Ultra 320/m SCSI RAID controller, 64-bit/66mhz, 64MB ECC cache

CD-ROM Subsystem:
24X Ultra DMA/33 slim CDROM reader

Sound Subsystem:
None

Network Subsystem:
Two integrated Broadcom BCM5704C Gigabit controllers, 1000BaseTX, 64-bit/100mhz PCI-X

System Slots:
Two (2) 64-bit/133mhz bus mastering PCI-X slots3

Note: Only PCI expansion cards up to 6.5in in length are supported.

System I/O:
One (1) RS-232C 16550 serial port
Two (2) USB 1.1 ports (rear)
One (1) USB 1.1 port (front)
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
One (1) 15-pin VGA port
Two (2) RJ-45 ports

Floppy Drive:
Optional

Mouse:
Optional

Keyboard:
Optional

Chassis:
ASL 1U Rack mount chassis, FCC Class B
400W power supply with PFC
Dimensions: 1.7" (H) x 17" (W) x 26.5" (D)
One (1) accessible slim floppy bay
One (1) accessible slim CDROM drive bay (used)
(1810-T) Four (4) hotswap 1" SATA hard drive bays
(1810-S/SR) Four (4) hotswap 1" SCA hard drive bays
Six (6) 40mm ball bearing fans
Sliding rails kit4

Preinstalled Software:
Red Hat 32-bit or 64-bit Linux with ASL optimized kernel

or

SuSE Linux 9.x Professional5 (ASL edition) for AMD64 platform, 64-bit operating system

  1. Each processor core has 1M L2 cache.
  2. Serial ATA bus operates at 133MB/s due to the 32-bit PCI bus limitation.
  3. Slots are incompatible with 5V PCI add-on card.
  4. Telco or front mounting is not supported.
  5. Require upgrade from CDROM to DVD-ROM.
Phone: 1.877.ASL.3535