Supermicro X9QRi-F+ server board
Intel Xeon E5-4600v2 series processors, up to 30MB L3 cache, up to 8GT/s QuickPath Interconnect, Ivy Bridge-EP core, HyperThreading (SMT), Socket LGA2011
Intel C602 server chipset
Thirty-two (32) 240-pin DIMM banks supporting up to 1TB DDR3-1600 ECC registered memory, 8 memory slots per CPU bank, Quad channel memory bus
Note: Quad channel memory bus requires 4 or 8 modules installed per CPU bank.
Onboard Matrox G200eW VGA controller with 16M display ram
(4110-T) Up to three (3) SATA 3.5in hard drives. These drives can be configured as standalone units or software RAID.
(4110-SR) Up to three (3) SATA or SAS 3.5in hard drives. These drives can be configured as standalone units or hardware RAID.
Note: Using SAS and SATA drives together is an unsupported configuration.
Intel® C602 PCH SATA controller, 2xSATA 6Gbs ports, 4xSATA 3Gbs ports
(4110-SR) 3Ware Escalade 9750-4i SAS2/SATA 6Gbs RAID controller, RAID level 0, 1, 5, 6, 10 & JBOD, PCI-Express x8, 512MB DDR2-800 ECC cache, optional Battery Backup Unit (BBU)
None
None
Onboard Intel i350 Dual-port PCI-Express Gigabit Ethernet controller, 1000BaseTX, RJ-45
Onboard in-band and out-of-band remote server management (over LAN, IPMI 2.0) with dedicated LAN
One (1) PCI Express x16 (v3.0) slot, low profile, half length
One (1) RS-232C 16550 serial port
One (1) DB-15 VGA port
Four (4) USB 2.0 ports
Two (2) RJ-45 Ethernet ports
One (1) RJ-45 Ethernet port (IPMI only)
Optional
Optional
ASL 1U Rack mount chassis, FCC Class B
Air Shroud and copper-based CPU heatsinks (passive design)
Chassis and CPU overheat alarm with front LED indication
Dimensions: 1.7" (H) x 17.2" (W) x 27.75" (D)
1400W EPS12V coldswap power supply, 80Plus Platinum Level
SAS backplane with enclosure management
Three (3) 3.5in hotswap hard drive bays
Seven (7) 4cm counter-rotating chassis fans
Sliding rail kit
Fedora, Ubuntu or CentOS 64-bit operating system