(1892-T) Supermicro X10DRT-L server board, proprietory form factor
(1892-TF) Supermicro X10DRT-LIBF server board, proprietory form factor
Intel Xeon E5-2600 v4 series processors, up to 22 cores, up to 9.6GT/s QuickPath Interconnect, Broadwell-EP core, HyperThreading (SMT), Socket LGA2011-3
Intel Xeon E5-2600 v3 series processors, up to 18 cores, up to 9.6GT/s QuickPath Interconnect, Haswell-EP core, HyperThreading (SMT), Socket LGA2011-3
Intel C612 server chipset
Eight (8) 240-pin DIMM banks supporting up to 512GB DDR4 ECC registered memory, 4 memory slots per CPU bank, Dual channel memory bus
Note: Dual channel configuration requires two or four modules per CPU bank
Note: Two processors are required to populate more than 4 memory modules.
Onboard in-band and out-of-band remote server management (over LAN, IPMI 2.0) with dedicated LAN
Up to two (2) SATA 3.5in hard drives. These drives can be configured as standalone units or software RAID.
Ten (10) SATA3 6Gbs ports via C612 chipset
None
None
Onboard Intel i350 Dual-port PCI-Express Gigabit Ethernet controller, 1000BaseTX, RJ-45
Onboard in-band and out-of-band remote server management (over LAN, IPMI 2.0) with dedicated LAN
(1892-TF) Onboard Mellanox ConnectX-3 FDR Infiniband 56Gbps Controller (QSFP cable not included)
One (1) PCI Express x16 (v3.0) slot, half length
One (1) RS-232C 16550 serial port
One (1) DB-15 VGA port
Two (2) USB 2.0 ports
Two (2) RJ-45 Ethernet ports
One (1) RJ-45 Ethernet port (IPMI only)
(1892-TF) One (1) QSFP Infiniband connector
Optional
Optional
Two (2) hotplug dual-processor nodes
ASL 1U Rack mount chassis, FCC Class B
Air Shroud and copper-based CPU heatsinks (passive design)
Chassis and CPU overheat alarm with front LED indication
Dimensions: 1.7" (H) x 17.2" (W) x 27.75" (D)
1000W EPS12V coldswap power supply, 80Plus Titanium Level, 96% efficiency
SAS backplane with enclosure management
Four (4) 3.5in hotswap hard drive bays
Six (6) 4cm chassis cooling fans
Sliding rail kit
Fedora, Ubuntu or CentOS 64-bit operating system