Supermicro X10DDW-i server board
Intel Xeon E5-2600 v4 series processors, up to 22 cores, up to 9.6GT/s QuickPath Interconnect, Broadwell-EP core, HyperThreading (SMT), Socket LGA2011-3
Intel Xeon E5-2600 v3 series processors, up to 18 cores, up to 9.6GT/s QuickPath Interconnect, Haswell-EP core, HyperThreading (SMT), Socket LGA2011-3
Intel C612 server chipset
Sixteen (16) 240-pin DIMM banks supporting up to 1TB DDR4 ECC registered memory, 8 memory slots per CPU bank, Dual channel memory bus
Note: Dual channel configuration requires 2, 4, 6 or 8 modules per CPU bank
Note: Two processors are required to populate more than 8 memory modules.
BMC (IPMI) integrated Aspeed AST2400 VGA (DB-15)
Up to four (4) SATA 3.5in hard drives. These drives can be configured as standalone units or software RAID.
Ten (10) SATA3 6Gbs ports via C612 chipset
Optional 8X Slim DVD optical reader/writer
None
Onboard Intel i350 Dual-port PCI-Express Gigabit Ethernet controller, 1000BaseTX, RJ-45
Onboard in-band and out-of-band remote server management (over LAN, IPMI 2.0) with dedicated LAN
Two (2) PCI Express x16 (v3.0) slots, full-height, half-length
One (1) PCI Express x8 (v3.0) slot, low-profile, half-length
Note: Both processors must be installed to access the second x16 slot.
One (1) RS-232C 16550 serial port
One (1) DB-15 VGA port
Two (2) USB 2.0 ports (rear access)
Two (2) USB 3.0 ports (rear access)
Two (2) RJ-45 Ethernet ports
One (1) RJ-45 Ethernet port (IPMI only)
Optional
Optional
ASL 1U Rack mount chassis, FCC Class B
Air Shroud and copper-based CPU heatsinks (passive design)
Chassis and CPU overheat alarm with front LED indication
Dimensions: 1.7" (H) x 17.2" (W) x 23.5" (D)
600W EPS12V power supply, 80Plus Platinum Level
SAS backplane with enclosure management
Four (4) 3.5in hotswap hard drive bays
One (1) Slim optical drive bay
Five (5) 4cm counter-rotating chassis fans
Sliding rail kit
Fedora, Ubuntu or CentOS 64-bit operating system