Lancelot 2860 Specifications.

Motherboard:
Supermicro X6DHE-XG2 motherboard

CPU:
Intel Xeon processors, Nocona core, 1M full speed L2 cache, 800MHz Quad Pumped FSB, NetBurst micro-architecture, HyperThreading (SMT), EM64T, Socket 604

Intel Xeon processors, Irwindale core, 2M full speed L2 cache, 800MHz Quad Pumped FSB, NetBurst micro-architecture, HyperThreading (SMT), EM64T, Socket 604

Chipset:
Intel E7520 Lindenhurst server chipset
Intel ICH5R Southbridge and PCI-X Hub (PXH)
Dual channel DDR2-400 support 6.4GB/s memory bandwidth
Dual channel UltraDMA/100 bus mastering IDE controllers
Dual channel SATA150 controller on ICH5R1 South Bridge

Memory Subsystem:
Eight DIMM banks supporting up to 16GB DDR2-400 ECC registered memory, single or dual channel memory access

Note: To enable dual channel memory (128-bit), modules must be populated in pairs.

Graphic Subsystem:
Integrated ATI Rage XL 8MB

Hard Disk Subsystem:
(2860-S/SR) Up to six Ultra 320/m hard drives in capacity from 36GB to 300GB. These drives can be configured as standalone unit or disk array(s), level 0, 1, 5, 10, hotspare supported

(2860-T/TR2) Up to six Serial ATA150 hard drives in capacity from 80GB to 400GB. These drives can be configured as standalone unit or disk array(s) using the Linux software RAID (2860-T) or hardware RAID (2860-TR2) (level 0, 1, 5, 10, hotspare supported)

ATA Subsystem:
Integrated dual channel Ultra ATA/100 controllers

SCSI Subsystem:
(2860-SR) LSI Logic MegaRAID 320-1LP single channel Ultra 320/m SCSI RAID controller, 64-bit/66mhz, 64MB ECC cache, optional Battery Backup Unit (BBU)

(2860-S) Onboard Adaptec 7902W dual channel Ultra 320/m SCSI controller, 64-bit/100mhz PCI-X

(2860-TR2) 3Ware Escalade 9550SX-8LP Serial ATA II RAID controller, RAID level 0, 1, 5, 10 & JBOD, 64-bit/133mhz PCI-X, 256MB ECC cache, optional Battery Backup Unit (BBU)

CD-ROM Subsystem:
(2860-S/T) 52X Ultra DMA/33 CDROM. Note: 24X slim CDROM can be used in order to preserve the 5.25in expansion drive bay for other peripheral such as tape drive or additional optical device.

(2860-SR/TR2) 24X Ultra DMA/33 slim CDROM

2nd CDRW/DVD-ROM/DVD+RW can be added

Sound Subsystem:
None

Network Subsystem:
Integrated Intel 82546GB Dual port Gigabit Ethernet controller, 1000BaseTX, RJ-45

Optional Intelligent Platform Management Interface (IPMI 2.0) board

System Slots: (low profile only)
Two (2) 3.3V2 64-bit/100MHz bus mastering, full length PCI-X slots, PCI-X bus #1 (share with SCSI/SATA/RAID controller)
One (1) 3.3V2 64-bit/133MHz bus mastering, full length PCI-X slot, PCI-X bus #2 (share with Gig LAN)
One (1) 3.3V2 64-bit/133MHz bus mastering, full length PCI-X slot, PCI-X bus #3
One (1) 3.3V2 64-bit/133MHz bus mastering, full length PCI-X slot, PCI-X bus #4
One (1) PCI Express x8 slot

System I/O:
One (1) RS-232C 16550 serial port
One (1) DB-15 VGA port
Two (2) USB 2.0 ports
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
Two (2) RJ-45 Ethernet ports

Floppy Drive:
1.44MB floppy drive

Mouse:
Optional

Keyboard:
Optional

Chassis:
ASL 2U Rack mount chassis, FCC Class B
Air Shroud and copper-based CPU heatsinks (passive design)
(2860-S/T) 550W fixed power supply with redundant cooling
(2860-SR/TR2) 500W hotswap and redundant power supply
Chassis and CPU overheat alarm with front LED indication
Dimensions: 3.5" (H) x 16.7" (W) x 26" (D)
One (1) accessible slim size CDROM bay
One (1) accessible floppy bay
One (1) accessible 5.25" drive bay
(2860-S/SR) Ultra 320/m SCA backplane

  • 1 SCSI channel of 6 drives
  • SAF-TE controller for RAID management
  • Six (6) hotswap SCA-2 1" hard drive bays
(2860-T/TR2) Serial ATA II backplane with special HD activity header
  • Six (6) coldswap/hotswap Serial ATA 150 drive bays

Four (4) 8cm hotswap fans
Sliding rails kit with telco mount support

Preinstalled Software:
Red Hat Linux with ASL optimized kernel, 32-bit operating system

  1. HostRAID is not supported under Linux.
  2. Slot is incompatible with 5V PCI add-on card.
Phone: 1.877.ASL.3535