Lancelot 1884 Specifications.

Motherboard:
Supermicro X9DRW-iF server board

CPU:
Intel Xeon E5-2600 series processors, up to 20MB L3 cache, up to 8GT/s QuickPath Interconnect, Sandy Bridge-EP core, HyperThreading (SMT), Socket LGA2011

Intel Xeon E5-2600 v2 series processors, up to 30MB L3 cache, up to 8GT/s QuickPath Interconnect, Ivy Bridge-EP core, HyperThreading (SMT), Socket LGA2011

Chipset:
Intel C602 server chipset

Memory Subsystem:
Sixteen 240-pin DIMM banks supporting up to 512GB DDR3 ECC registered memory, 8 memory slots per CPU bank, Quad channel memory bus

Note: Quad channel memory bus requires 4 or 8 modules installed per CPU bank.
Note: Two processors are required to populate 12 or 16 memory modules.

Graphic Subsystem:
Onboard Matrox G200eW VGA controller with 16M display ram

Hard Disk Subsystem:
(1884-T) Up to four SATA drives. These drives can be configured as standalone unit or software RAID.
(1884-SR) Up to four SAS or four SATA drives. These drives can be configured as standalone unit or hardware RAID.

Note: Using SAS and SATA drives together is an unsupported configuration.

SATA Subsystem:
Two (2) SATA 6Gbs ports
Eight (8) SATA 3Gbs ports

SCSI Subsystem:
(1884-SR) 3Ware Escalade 9750-4i SAS2/SATA 6Gbs RAID controller, RAID level 0, 1, 5, 6, 10 & JBOD, PCI-Express x8, 512MB DDR2-800 ECC cache, optional Battery Backup Unit (BBU)

CD-ROM Subsystem:
Optional slim DVD optical reader/writer

Sound Subsystem:
None

Network Subsystem:
Onboard Intel i350 Dual-port PCI-Express Gigabit Ethernet controller, 1000BaseTX, RJ-45
Onboard in-band and out-of-band remote server management (over LAN, IPMI 2.0) with dedicated LAN

System Slots:
Two (2) PCI Express x16 (v3.0) slots, full height, half length

System I/O:
One (1) RS-232C 16550 serial port
One (1) DB-15 VGA port
Four (4) USB 2.0 ports (rear access)
Two (2) USB 2.0 ports (front access)
Two (2) RJ-45 Ethernet ports
One (1) RJ-45 Ethernet port (IPMI only)

Floppy Drive:
None

Mouse:
Optional

Keyboard:
Optional

Chassis:
ASL 1U Rack mount chassis, FCC Class B
Air Shroud and copper-based CPU heatsinks (passive design)
600W EPS12V single power supply, 80Plus, 94% efficiency
Chassis and CPU overheat alarm with front LED indication
Dimensions: 1.7in (H) x 17.2in (W) x 23.5in (D)
One (1) accessible slim size CDROM bay
SAS backplane with enclosure management
Four (4) hotswap hard drive bays
Five (5) 4cm counter-rotating chassis fans
Sliding rails kit with telco mount support

Preinstalled Software:
Fedora or CentOS 64-bit operating system

Phone: 1.877.ASL.3535