Lancelot 1866 Specifications.

Motherboard:
Intel 5000P Blackford server board, E-ATX form factor

CPU:
Intel Dual Core Xeon processors (Woodcrest), 2M+2M full speed L2 cache, 1066MHz or 1333mhz Quad Pumped FSB, Core micro-architecture, HyperThreading (SMT), EM64T, Socket LGA771

Intel Quad Core Xeon processors (Clovertown), 4M+4M full speed L2 cache, 1066MHz or 1333mhz Quad Pumped FSB, Core micro-architecture, HyperThreading (SMT), EM64T, Socket LGA771

Chipset:
Intel 5000P Blackford server chipset
Intel ESB2 Enterprise Southbridge and PCI-X Hub (PXH-V)
ESB2 6-port SATA II controller with HostRAID1
Single Ultra ATA/100 IDE controller supporting two UDMA devices

Memory Subsystem:
Eight 240-pin DIMM banks supporting up to 32GB DDR2-667 ECC FB-DIMM memory, 667mhz, 128-bit memory bus

Note: Memory modules must be populated in pairs.

Graphic Subsystem:
Onboard ATI ES1000 VGA controller with 16M display ram

Hard Disk Subsystem:
(1866-S/SR) Up to four Ultra 320/m hard drives in capacity from 36GB to 300GB. These drives can be configured as standalone unit or disk array(s) using the Linux software RAID (1866-S) or hardware RAID (1866-SR) (level 0, 1, 5, 10, hotspare supported)

(1866-T/TR2) Up to four Serial ATA hard drives in capacity from 80GB to 750GB. These drives can be configured as standalone unit or disk array(s) using the Linux software RAID (1866-T) or hardware RAID (1866-TR2) (level 0, 1, 5, 10, hotspare supported)

ATA Subsystem:
Onboard single channel Ultra ATA/100 controller

SCSI Subsystem:
(1866-SR) LSI Logic MegaRAID 320-1LP single channel Ultra 320/m SCSI RAID controller, 64-bit/66mhz PCI, 64MB ECC cache, optional Battery Backup Unit (BBU)

(1866-S) Onboard Adaptec 7902W dual channel Ultra 320/m SCSI controller, 64-bit/100mhz PCI-X

(1866-TR2) 3Ware Escalade 9650SE-4LPML Serial ATA II RAID controller, RAID level 0, 1, 5, 10 & JBOD, PCI-Express x4, 256MB DDR2-533 ECC cache, optional Battery Backup Unit (BBU)

CD-ROM Subsystem:
8X DVD-ROM optical reader

Sound Subsystem:
None

Network Subsystem:
Onboard Intel 82563EB (Gilgal) Dual port PCI-Express Gigabit Ethernet controllers, 1000BaseTX, RJ-45
Optional Intelligent Platform Management Interface (IPMI 2.0) board

System Slots:
One (1) 3.3V2 64-bit/133MHz PCI-X or PCI-E x8 slot3 (low profile card only)
One (1) 3.3V2 64-bit/133MHz PCI-X slot or PCI-E x8 slot

System I/O:
One (1) RS-232C 16550 serial port (COM A)
One (1) DB-15 VGA port
Two (2) USB 2.0 ports
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
Two (2) RJ-45 Ethernet ports
(1866-S/SR) One (1) VHDCI SCSI port

Floppy Drive:
1.44Mb slim floppy drive

Mouse:
Optional

Keyboard:
Optional

Chassis:
ASL 1U Rack mount chassis, FCC Class B
Air Shroud and copper-based CPU heatsinks (passive design)
(1866-S/T) 700W EPS12V cold swap power supply with active PFC
(1866-SR/TR2) 700W EPS12V hotswap and redundant power supply with active PFC
Chassis and CPU overheat alarm with front LED indication
Dimensions: 1.7" (H) x 17.2" (W) x 26.8" (D)
One (1) accessible 5.25" slim CD bay (used)
One (1) accessible 3.5" slim FD bay (used)
(1866-S/SR) Ultra 320/m SCA backplane

  • SAF-TE controller for RAID management
  • Four (4) hotswap SCA-2 (80-pin) hard drive bays
(1866-T/TR2) Serial ATA II/SAS backplane with enclosure management
  • Four (4) hotswap Serial ATA hard drive bays

Four (4) 40cm counter-rotating chassis fans
Sliding rails kit with telco mount support

Preinstalled Software:
Red Hat Linux with ASL optimized kernel, 32-bit or 64-bit operating system

  1. HostRAID is not supported under Linux.
  2. Slot is incompatible with 5V PCI add-on card.
  3. Slot is used on the SR and TR models.
Phone: 1.877.ASL.3535